Botticino Wall and Floor Tile

HOME | TILE BY MATERIAL | PORCELAIN FLOOR AND WALL TILE | BOTTICINO

HOME | TILE BY MATERIAL | CERAMIC WALL TILE | BOTTICINO

Magica has created a wall and floor combination by reinventing the classic Botticino look using the latest inkjet technology. The Botticino series is elegant in its simplicity with the beauty, characteristics and variation of natural stone. The wall tile is a rectified white body tile with a shiny finish. The floor component to this line is a matte glazed porcelain, which is also suitable for walls. There are three corresponding colors available in both wall and floor tile.

WALL TILE

AVORIO WALL TILE (MABOOAOW)	ORO WALL TILE (MABOOOW)	CREMA WALL TILE (MABOCAW)
WALL TILE SIZES
10 X 22 (rectified)	MABO--W/1022
WALL TILE TRIM
2 X 10 Surface Bulnose	MABO--W/SBN
The surface bullnose is made from field tile that is cut, ground and then glazed.
WALL TILE COORDINATING TRIM
Expect variation in color and size between field and trims.
10" Quarter Round	MABO--W/A110
Beak	MABO--W/AC110
FLOOR TILE

AVORIO FLOOR TILE (MABOAOF)	ORO FLOOR TILE (MABOOOF)	CREMA FLOOR (MABOCAF)
FLOOR TILE SIZES
Glazed porcelain with a matte finish suitable for walls, floors and counters. (As with a natural stone it has extremely wide color variation. To achieve this full color variation, we recommend mixing tiles within each carton and from at least 4-5 cartons during installation.)
13 X 13	MABO--F/1313
20 X 20	MABO--F/2020
2 X 2 MOSAIC	MABO--F/22 (Mosaic mounted on a 13 x 13 sheet)
FLOOR TILE TRIM
4 x 20 surface bullnose	MABO--F/SBN
The surface bullnose is made from field tile that is cut, ground and then glazed.
FLOOR TILE COORDINATING TRIM
13" Quarter Round	MABO--F/A113
Beak	MABO--F/AC113
Expect variation in color and size between field and trims.
BOTTICINO PHOTOS AND INSTALLATIONS

PHYSICAL CHARACTERISTICS - FLOOR TILE

The Coefficient of Friction is a general guide only. Testing may vary with different production runs and with different testing labs. As noted in the American with Disabilities Act (ADA) the coefficient of friction varies considerably due to facts not under the control of entities such as the manufacturers and distributors. These factors include, but are not limited to, contaminants, slope of terrain, drainage conditions, adjacent surfaces, etc. Suitability for any installation can only be determined by a site examination of all conditions that could affect the slip resistance of the tile being installed. Continual cleaning and maintenance must be performed once the tile has been installed. For more information see our current handout Americans with Disabilities Act and Slip Resistance of Tile.