SIZES
|
| Available in all field colors. |
12x12
12x24
24x24
2 x 2 Mosaic |
DCNT--/1212
DCNT--/1224
DCNT--/2424
DCNT--/22 (sheet mounted on 12 x 12 sheet)
|
The four field sizes are not modular with a grout joint. Mixing sizes to create patterns may be possible, but it is advisable to check on the particular pattern and the calibers available.
|
 |
| COLORS |
| Available in all field sizes. |
Alaska (Ivory)
Nevada (Green/Grey)
Nebraska (Grey) |
DCNT10
DCNT3
DCNT5 |
|
COORDINATING TRIM |
| The Surface Bullnose is made from field tile that is cut, ground and then reglazed.
It is important to blend tiles within each carton, and from many cartons during installation to capture the dramatic variation that is characteristic of this Slate look. |
3 x 12 Surface Bullnose
12" Quarter Round
Beak
|
DCNT--/SBN
DCNT--/A112
DCNT--/AC112 |
|
NAT PHOTO GALLERY |

|
| USE & INSTALLATION |
| Suitable for both commercial and residential applications. |
 |
The Coefficient of Friction is a general guide only. Testing may vary with different production runs and with different testing labs. As noted in the American with Disabilities Act (ADA) the coefficient of friction varies considerably due to facts not under the control of entities such as the manufacturers and distributors. These factors include, but are not limited to, contaminants, slope of terrain, drainage conditions, adjacent surfaces, etc. Suitability for any installation can only be determined by a site examination of all conditions that could affect the slip resistance of the tile being installed. Continual cleaning and maintenance must be performed once the tile has been installed. For more information see our current handout Americans with Disabilities Act and Slip Resistance of Tile. |