HOME ABOUT US LOCATIONS ROOM IDEAS
TILE BY MATERIAL TILE BY SERIES WHAT'S NEW
HOME | TILE BY MATERIAL | GLASS TILE | APPILAN
 |
|||||||||
| Frosted glass with shaded color blends and straight edges | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| (VOAN--/12) 1 x 2 pieces are mounted broken joint on square foot sheets. Partial sheets shown below. | |||||||||
COLORS |
|||||||||
| GROUP 1 | |||||||||
| VOANCE VOANME VOANSG |
Cafe Melange Spring |
||||||||
GROUP 2 |
|||||||||
|
VOANAD |
Almond | ||||||||
USAGE |
|||||||||
| Suitable for walls and light duty floors, but is susceptible to some scratching. | |||||||||
PRODUCT INFORMATION |
|||||||||
| Glass can vary within each run and from production run to production run. Glass tile may be susceptible to scratching in handling and installation, as well as use. Make sure that during installation the tile does not become dirty with grout residue or setting materials. If this should happen, immediately clean the affected area with a sponge, and do not use abrasives, alcohol, acids or solvents. Brochure colors are intended as a guide only and may vary from actual tile. Please check tile samples before making final selections. | |||||||||
SETTING GUIDELINES |
|||||||||
| Glass requires special installation: Only use white adhesive with high adhesion and elasticity which are especially recommended for installing glass. All substrates should be properly reinforced to be sure that there is no movement. For mortar installations, the mortar bed has to be cured (less than 2% humidity) and has to have proper reinforcing. Please refer to the TCNA Handbook for specific information regarding installation of glass tile. | |||||||||
Back to Top
Previous Page